Add: No. 68, Puxi 2 Zone, Linhai, Linshan Town, Yuyao, Zhejiang, China. 

Tel:86-574-62078325  Fax:86-574-62078315

Copyright © YUYAO CHAOLI ELECTRIC APPLIANCE CO., LTD. 浙ICP备2022028058号-1   Power by

High-quality stable and reliable, from the super CHAO LI


PD4 Series Dropout Fuse Cutouts

PD4 Series Dropout Fuse Cutouts

Dropout fuse cutout and load break type fuse cutouts are outdoor high voltage protective device with rated voltage from 3KV ~ 40.5KV.
Product Overview
Product parameters
They are connected with incoming feeder of distribution transformer or distribution line. These are primarily used to protect transformers or lines from short circuit and overloading and switching currents. The dropout fuse cutout is composed of insulator support and fuse holder, static contacts are fixed on two sides of insulator support, moving contact installed on the two ends of fuse holder, the interior of the fuse tube is arc-extinguishing tube/layer, exterior is made of phenolic compound paper tube or epoxy glass. Load break type provides stretch auxiliary contacts and arc-chute cover to switch on/off loading current.
In normal operation the fuse link is tightened to form the closed position, when fault current occurs, the fuse link melts down and electric arc produce, the arc extinguishing tube is heated and explosive gas happens. This results in high pressure inside the tube and makes tube to be disconnected from the contacts. The strength of the contact is released once the fuse elements melt down.
The cutout now is in OFF position, the operator needs to switch off the current. Use an insulated operating rod to pull, the moving contact can be pulled off. 
Dropout fuse cutouts comply with GB/T15166.3,IEC282-2,ANSI /IEEE C37.41, C37.42 standards.
General Working Conditions
Operating site:outdoor
Ambient temperature:-25℃ ~ 50℃
Air humidity:≤95%
Mounting angle:Approximately 15º~25 º (vertical)
Corresponding parameter set not found, please add it in property template of background

PD4 Series Dropout Fuse Cutouts

Model Rated voltage
Rated current
Current (A)
voltage (KV)
Leakage distance
Appr. Weight
Appr. Dimensions
PD4-15 10(15) 100 10000 110 35 230 6.3 39x35x11
200 12500 6.6
PD4-27 22(24) 100 8000 125 45 320 7.8 47x36x12
200 9600 8.2
PD4-38 33(35) 100 6000 170 75 720 11.2 57x37x12
200 8000 11.7

Note:Leakage distance of porcelain insulators is available from 220mm ~ 1000mm as requested such as 320, 400, 530, 720MM etc;
also brown color for insulator is optional.

Previous article--
--Next article

Related Products

GW-12 Series Disconnectors

Y10W Series Ceramic Arresters

Y5W Series Ceramic Arresters

Mounting Bracket

Brass casting parts II

Brass casting parts III